 |
|
REMOTE STARTER AND KEYLESS ENTRY SYSTEM
 Small
modular housing |
Auto re-crank (5 times) |
|
Built-in relays |
Auto cranking time extended |
| 2 x 2
button FCC approved TX |
Run
time programmable via TX |
| Self
learning TX - 3 programmable |
CDL pulse time programmable via TX |
|
Negative pulse CDL outputs |
Alternator or tach wire detect programmable via TX |
|
2 stage CDL unlock |
Cranking time programmable via TX |
|
Flashing status LED |
Negative or positive engine start inputs for auto timer |
|
Flashing light outputs for lock/unlock/run |
Diagnostic installation check function |
|
Siren output for confirmation chirps |
Built-in safety features |
| Optional: Siren. CDL relay interface for positive, direct motor drive and
vacuum central
locking systems.
|
|
Function:
Transmitter buttons... large RED = button 1, small GREEN = button 2.
|
Function |
Transmitter button |
Original status |
Indicator lights |
|
Remote lock |
Press button 1 |
Doors unlocked |
1 flash (no flash with ignition on)* |
|
1st stage remote unlock |
Press button 1 |
Drivers door locked |
3 flashes (no flashes with ignition on)** |
|
2nd stage remote unlock |
Press button 1 twice within 3 seconds |
Passenger doors locked |
3 flashes (no flashes with ignition on)** |
|
Remote engine start |
Press button 2 twice within 3 seconds |
Ignition off |
Constant flashing |
|
Remote engine stop |
Press button 1 and 2 simultaneously |
Engine running via remote start |
Lights stop flashing |
*/** = chirps if optional siren was installed.
